Tips for using iron powder briquette machine

Post Time：25-03-10 09:26:51    Author：Lantian Machinery    Email:Alisa@lantianmachine.com

The iron powder briquette machine has improved the feed port, which can be affected by its own gravity and enter the middle of the two rollers. The surfaces of the two rollers are evenly distributed with grooves of the same shape. The two rollers rotate at the same speed and in opposite directions, forcing the iron powder into the grooves and forcibly compressing the materials. The pressed iron powder pellets are de-balled under their own surface tension and gravity.

Common sense for using iron powder briquette machine:

1. In order to ensure the normal operation of the equipment, a feeding machine with adjustable feeding amount must be used before the material enters the equipment.

2. The related equipment before and after the equipment must be started and stopped with the equipment in a chain program.

3. After the equipment is operating normally, the connection parts should be checked regularly for firmness.

4. When removing and replacing bearings, the radial clearance of the bearings should be adjusted, and the clearance should meet the standards.

5. The lubrication points of the fixed bearing seat and the sliding bearing seat of the equipment should be refueled on time to ensure that 80% of the grease is maintained in the cavity. Every time the transmission support is refueled, it should be ensured that grease is squeezed out from the shaft end on the pre-pressing device. (The purpose is to exclude dust materials from entering and damaging the bearings).

6. The hydraulic oil pump and oil filter should be cleaned after one month of use. The oil tank should be cleaned and replaced with new oil after the effective working period of 3-6 months. The winter ambient temperature of the hydraulic station is not less than 5℃.

In the long-term operation and use of the iron powder briquette machine, it is inevitable that some of the materials will be spilled. If the materials are spilled next to the machine, it is okay to sweep it, and it will not affect the operation of the entire machine. However, if the materials are spilled into the machine, the long-term accumulation will block the entire machine, and the materials of this machine are basically some that contain a certain amount of water.

If the staff does not clean it in time, the surface of the machine parts will rust, which will seriously affect the operation of the machine. This will not only affect our production, but also affect the quality of molding, and even threaten the life of the ball press equipment. Today, we would like to remind the majority of ball press equipment users not to blindly ask for the output of the ball equipment, but also pay attention to the maintenance and cleaning of the equipment. Only in this way can we produce more and better products.