How to solve common faults of charcoal powder ball press machine

Post Time：25-05-09 14:06:15    Author：Lantian Machinery    Email:Alisa@lantianmachine.com

charcoal powder ball press machine may have some faults after long-term operation. In order not to affect the normal production of the enterprise, it is very necessary to master the common faults and solutions of charcoal powder ball press machine.

1. Not forming or not forming:

charcoal powder ball press machine sometimes has problems of not forming or not forming during use. The reasons for this problem are usually insufficient feeding, too low hydraulic pressure, soft roller skin quenching, ball socket deformation, etc. Insufficient feeding will make the material of the ball press.

2. Failure to remove the ball:

Excessive moisture content in the material, insufficient pressure strength of the ball embryo, rough surface of the new ball socket, etc. may all cause failure to remove the ball. At this time, it is necessary to remove the excessive moisture in the material, and use a dryer; increase the working pressure to increase the pressure strength of the powder ball press and other equipment; remove the stored material in the ball socket to ensure the smooth surface of the ball socket.

3. Dislocation of the ball socket:

The dislocation of the ball socket may be caused by loose adjustment bolts or loose fit between the roller skin and the shaft. The ball press equipment can be adjusted to the socket and then tightened with bolts, or the roller skin bearing can be replaced, or it can be processed by welding and then re-grinding.

4. Oil pressure cannot be applied:

Sometimes, the charcoal powder ball press machine cannot be applied with oil pressure during operation. The cause of this problem may be the blockage of the oil suction port and the deformation of the sealing gasket at the connection. If the oil suction port is blocked, it should be cleaned in time to ensure the cleanliness of the charcoal powder ball press machine; if the sealing gasket is deformed, the deformed gasket can be replaced with a new sealing gasket, so as to ensure the normal operation and effective work of the ball press equipment.