Lignite Dryer

Lignite Dryer

Brief introduction of lignite coal rotary dryer

Our factory is the professional manufacturer of Lignite dryer in China, we can provide you the rotary dryer with the high cost performance. The Lignite rotary dryer can dewater and dry for that watery material, and it can change the moister as 13% below by dewatering. With latest technology, Lignite coal dryer can increase the burning efficiency, make the best of the carbon resource, reduce the density of waste, achieve the saving energy & reducing waste and the safety & protection. Based on the traditional structure of the rotary dryer, this new type of Lignite coal dryer can not only break materials, but also improve the thermal efficiency of drying machine. It can even deal with crumb, high moisture sticky materials, paste material and liquid materials. And it is applicable to the chemical industry, brewing, pharmaceutical industry, etc.
Lignite Dryer  Lignite Dryer

Performance characteristics of Lignite dryer

1. Large capacity, continuous and stable operation;
2. Rotary speed and scattering device speed can be adjusted, and can meet the requirements of different materials;
3. Low consumption and energy saving; the water in finished products are under 30%.
4. Dependable structure and good Manufacturing to guarantee it fine with long-time operation.
5. It is widely used for drying slag limestone, coal powder, slag, clay, etc, and it can be used to dry grain.
6. With the recycle burning device, Lantian Lignite rotary dryer save coal, reduce the coal powder content of finished produ

Technical parameter of lignite dryer 

The dryer series(mm) Production (t/h) The host power(kw) Deceleration machine Feed water (%) The fuel coal calorific value Discharge water(%)
LHGΦ1.0x10 2-2.5 M160M-6→7.5 ZQ350Ⅱ- 25 25 + / -5 p5500 Or less13
LHGΦ1.2x10 2.5 3 M160M-6→7.5 ZQ350Ⅱ- 25 25 + / -5 p5500 Or less13
LHGΦ1.5x14 7-9 Y180L-6→15 ZQ400Ⅱ-31.5 25 + / -5 p5500 Or less13
LHGΦ1.5x18 9.5-12 Y180L-6→15 ZQ400Ⅱ-31.5 27 + / -5 p5500 Or less13
LHGΦ1.8x14 12-15 Y200L-6→18.5 ZQ400Ⅱ-31.5 25 + / -5 p5500 Or less13
LHGΦ1.8x18 14-18 Y200L1-6→18.5 ZQ400Ⅱ-31.5 27 + / -5 p5500 Or less13
LHGΦ2.0x18 18-22 Y200L2-6→22 ZQ50Ⅱ-31.5 25 + / -5 p5500 Or less13
LHGΦ2.0x20 18-23 Y200L2-6→22 ZQ50Ⅱ-31.5 30 + / -5 p5500 Or less13
LHGΦ2.2x18 21-25 Y200L2-6→22 ZQ65Ⅱ-31.5 27 + / -5 p5500 Or less13
LHGΦ2.2x20 22-25 Y225M-6→30 ZQ65Ⅱ-31.5 30 + / -5 p5500 Or less13
LHGΦ2.4x20 25-29 Y225M-6→30 ZQ75Ⅱ-31.5 27 + / -5 p5500 Or less13
LHGΦ2.4x22 26-30 Y225M-6→30 ZQ75Ⅱ-31.5 30 + / -5 p5500 Or less13
LHGΦ2.6x20 28-33 Y250M-6→37 ZQ85Ⅱ-31.5 25 + / -5 p5500 Or less13
LHGΦ2.6x24 29-35 Y250M-6→37 ZQ85Ⅱ-31.5 30 + / -5 p5500 Or less13
LHGΦ3.0x20 45-50 Y280S-6→45 ZQ100Ⅱ-31.5 25 + / -5 p5500 Or less13

Compared before and after drying 
Lignite Rotary Dryer

Working principle of lignite coal rotary dryer      

The wet materials are conveyed to the hopper through the belt conveyor or bucket elevator, and then enter into the feed end through the hopper charger and the feeding pipe in sequence. The inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly. The materials enter from the higher end, and the heat carrier enters from the lower ender; the two contact each other from opposite directions, but there are also circumstances that the heat carrier flows into the dryer body together with the material.
Lignite Coal Dryer

The case

Lignite Coal Dryer

Customers Visiting Our Factory
The customers visit Lantian mechanical plant

Packaging and shipping
Lignite Rotary Dryer

Our certifications
The CE and ISO certifications of Lantian mechanical plant  The CE and ISO certifications of Lantian mechanical plant
Our Services

1, Accept the customer's ask, confirm the scale, provide the  purchase plan according to the customer's need
2, Provide the related technology documents to customers
3, Test the equipment for customers on free
4, Provide  genuine part in time
5, Accept the Technical Advisory ,provide the  technique in diagnosis for 24 hours

Company information

Located in Gongyi, Zhengzhou province in China, Lantian machinery is a professional drying equipment manufacturer specialized in manufacturing all kinds of drying equipment such as Lignite dryers, rotary dryers and dust collectors, which is widely used in chemical and food factories etc. We have established long-term good relationship with over100domestic and overseas companies .Due to the high quality and satisfaction service, most of our products have won high praise among our customers. We are honestly looking forward to cooperating with you.
Lignite Rotary Dryer of Lantian machinery


Email Us(*)Required information

Product List
Contact Us
contact us
Tel :

Fax :
E-mail :

ADD : Heluo Rd, Gongyi City,
Henan Province, PR China 451200